Making a call by entering
phone number
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
1
Display the function menu.
Refer to
Introduction to advanced operations
on page 39.
2
Use MULTI-CONTROL to select
NUMBER DIAL.
#
You can also enter in this menu from the
standby display by pressing
DIRECT
on the re-
mote control.
3
Push MULTI-CONTROL up or down to
select a number.
#
You can also input numbers by pressing
0
to
9
on the remote control.
4
Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
#
Up to 24 digits can be entered.
5
When you finish entering the number,
press MULTI-CONTROL.
Call confirmation appears.
6
Press MULTI-CONTROL again to make a
call.
7
To end the call, press
.
Clearing memory
1
Display the function menu.
Refer to
Introduction to advanced operations
on page 39.
2
Use MULTI-CONTROL to select
CLEAR MEMORY.
3
Push MULTI-CONTROL up or down to
select an item.
PHONE BOOK
(phone book)
—
ALL CLEAR
(delete all memory)
—
DIAL PRESET
(preset
phone numbers)
—
RECENT CALLS
(call his-
tory)
#
If you want to clear the entire Phone Book,
call history list and preset phone number, select
ALL CLEAR
.
4
Push MULTI-CONTROL right to deter-
mine the item that you want to delete
from this unit.
CLEAR MEMORY: YES
is displayed. Clearing
memory is now on standby.
#
If you do not want to clear the memory that
you have selected, push
MULTI-CONTROL
left.
The display reverts to normal.
5
Press MULTI-CONTROL to clear the
memory.
CLEARED
is displayed and data on the se-
lected item is cleared from this unit
’
s memory.
Changing the phone book
display order
1
Display the function menu.
Refer to
Introduction to advanced operations
on page 39.
2
Use MULTI-CONTROL to select
PH. B. NAME VIEW.
INVERT NAMES YES
is displayed.
3
Press MULTI-CONTROL to change the
name view order.
Pressing
MULTI-CONTROL
repeatedly
changes the name view order between first
and last name.
Selecting menu language
Menu language related to Bluetooth audio/tel-
ephone can be changed.
!
Some characters may not be displayed
properly.
1
Display the function menu.
Refer to
Introduction to advanced operations
on page 39.
2
Use MULTI-CONTROL to select MENU.
Operating this unit
En
42
Section
02
