manualshive.com logo in svg

Pioneer ELITE VSX-LX505, Instruction Manual

The Pioneer ELITE VSX-LX505 is a top-of-the-line AV receiver that boasts impressive features and exceptional sound quality. With its user-friendly interface, navigating this receiver couldn't be easier. For your convenience, an Instruction Manual is available for free download from manualshive.com, ensuring you get the most out of your audio experience.

Share
Download
background image

80

Playback

You can wirelessly play music on a smartphone or other BLUETOOTH wireless technology enabled device through the speakers connected to this unit. It is also 

possible to transmit the audio from this unit to BLUETOOTH enabled headphones, wireless speakers, etc.

Playing audio from BLUETOOTH wireless technology enabled devices with this unit

Perform the following procedure when this unit is on.

Pairing

1.  When you press the BLUETOOTH button, "Now Pairing..." is displayed on this 

unit's display, and the pairing mode is enabled.

2.  Enable (turn on) the BLUETOOTH function of the BLUETOOTH enabled 

device, and then select this unit from among the devices displayed. If a 

password is requested, enter "0000".

• 

This unit is displayed as "Pioneer VSX-LX505 XXXXXX". This display can 

be changed with the Friendly Name function ( 

→

p159

) or the Pioneer 

Remote App ( 

→

p171

) (can be used with the iOS or Android™).

• 

To connect another BLUETOOTH enabled device, press and hold the 

BLUETOOTH button until "Now Pairing..." is displayed, and then perform 

step 2. This unit can store the pairing information of up to 8 paired devices.

•  The coverage area is approx. 48´/15 m. Note that connection is not always 

guaranteed with all BLUETOOTH enabled devices.

Playing Back

1.  Perform the connection procedure on the BLUETOOTH enabled device.

2. 

Playing the music file.

 

The input on this unit automatically switches to "BLUETOOTH". 

Turn up the volume of the BLUETOOTH enabled device to an appropriate 

level.

• 

Due to the characteristics of BLUETOOTH wireless technology, the sound 

produced on this unit may slightly be behind the sound played on the 

BLUETOOTH enabled device.

BLUETOOTH

®

 Playback

Pioneer VSX-LX

The illustration shows an image.

Summary of Contents for ELITE VSX-LX505





















































































































































































































Reviews:

No comments

Related manuals for ELITE VSX-LX505

Haier L19A11W User Manual preview
L19A11W
Brand: Haier Pages: 160
VDO MS 4100 - Datasheet preview
MS 4100 -
Brand: VDO Pages: 2
VDO CD 4203 - Datasheet preview
CD 4203 -
Brand: VDO Pages: 2
Xoro HRT 7622 User Manual preview
HRT 7622
Brand: Xoro Pages: 44
Xomax XM-CDB624 Installation Manual preview
XM-CDB624
Brand: Xomax Pages: 18
VDO TR 7322U-OR - Datasheet preview
TR 7322U-OR -
Brand: VDO Pages: 1
Yaesu FTM-100DE Instruction Manual preview
FTM-100DE
Brand: Yaesu Pages: 15
Yaesu FT-891 Technical Supplement preview
FT-891
Brand: Yaesu Pages: 99
Yaesu FT-891 Reference Book preview
FT-891
Brand: Yaesu Pages: 20
Yaesu FTM-100DR Quick Manual preview
FTM-100DR
Brand: Yaesu Pages: 2
Yaesu FTM-100DR Operating Manual preview
FTM-100DR
Brand: Yaesu Pages: 176
CEBEK RJ-5 Quick Start Manual preview
RJ-5
Brand: CEBEK Pages: 2
Yaesu FT-2980R Operating Manual preview
FT-2980R
Brand: Yaesu Pages: 80
Yaesu FT-101E Instruction Manual preview
FT-101E
Brand: Yaesu Pages: 42
Sab Satellite Titan III Combo HD User Manual preview
Titan III Combo HD
Brand: Sab Satellite Pages: 43
Boss Audio Systems BV9370NV User Manual preview
BV9370NV
Brand: Boss Audio Systems Pages: 76
Intermatic RC613 Installation, Operation & Service Manual preview
RC613
Brand: Intermatic Pages: 2
AMG AMG3782RN-DR-SF Instruction Manual preview
AMG3782RN-DR-SF
Brand: AMG Pages: 12

Brands by name

Popular brands

Load more brands