For setting the IP address, press
to select
“Yes” or “No”, then press
ENTER
.
Do you obtain the IP address
automatically?
IP Address
Netmask
Gateway
Next
Yes
No
If selecting “Yes”: The IP address is automatically
obtained.
If selecting “No”: The IP address, netmask, gateway
and primary and secondary DNS IP addresses are
manually entered using the screen for inputting
characters. (See page 50.)
Press
to select “Next”, then press
ENTER
.
For setting the proxy server, press
to
select “Yes” or “No”, then press
ENTER
.
Do you use the proxy server?
Address
Port
Next
Yes
No
If selecting “Yes”: The IP address or proxy server
name and port number for the proxy server specified
from your internet service provider are entered using
the screen for inputting characters. (See page 50.)
If selecting “No”: Go to the next step.
Press
to select “Next”, then press
ENTER
.
If “Ethernet Setup(Wireless)” was selected at step 4,
proceed to step 17.
For setting the Ethernet connections speeds,
press
to select “Yes” or “No”, then press
ENTER
.
Normally select “No”, then press
ENTER
. Proceed to
step 17
When the Ethernet connection speeds can be set,
select “Yes” then press
ENTER
.
10
•
•
11
12
•
•
13
•
14
•
•
Settings
Press
to select the Ethernet connection
speeds, then press
ENTER
.
As automatic detection is made (factory preset
mode), this setting is not normally necessary. If a
situation occurs in which the Ethernet connection fails,
etc., change the setting and confirm if the Ethernet
connection successfully works. When the connection
speed is set, select “Next”, then press
ENTER
.
Option
Ethernet Connection Speeds
Next
Auto-Detection
10M Half Duplex
100M Half Duplex
10M Full Duplex
100M Full Duplex
Press
to select “Next”, then press
ENTER
.
For testing the connection to the internet, after
confirming the settings, press
to select
“Test”, then press
ENTER
.
“Test” is available only when setting to obtain the IP
address automatically. “Test” cannot be selected if the
IP address has not been obtained automatically.
Confirm the current setting.
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xx:xx:xx:xx:xx:xx
IP Address
Netmask
Gateway
DNS Address
MAC Address
Test
Complete
As a result of the test, if the internet connection fails,
enter the setup values manually.
Press
to select “Complete”, then press
ENTER
.
15
•
16
17
•
•
18
49
Settings
