The Initial Setup menu
18
144
En
HDMI Output
(only available when an HDMI device is connected)
Screen
Resolution
1920 x 1080p
Constant 1920 x 1080
p
out
p
ut.
1920 x 1080i
Constant 1920 x 1080i out
p
ut.
1280 x 720p
Constant 1280 x 720
p
out
p
ut.
720 x 576p
(720 x 480p)
Constant 720 x 576
p
out
p
ut (when setting the
Input Line
System
to
525 System
, video is out
p
ut in 720 x 480
p
).
720 x 576i
(720 x 480i)
Constant 720 x 576i out
p
ut (when setting the
Input Line
System
to
525 System
, video is out
p
ut in 720 x 480i).
• Depending on the connected device some settings may not be available.
• If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case,
press
OPEN/CLOSE
while holding down the
(Stop) button on the front panel to switch the setting (this also
switches Component Video Out on page 137 to the default setting).
• If you have the
Colour
set to
YCbCr 4:2:2
, you cannot select
720 x 576i
(720 x 480i)
.
4:3 Video Output Full
Select if you
r
HDMI TV allows you to change the as
p
ect
r
atio.
Normal
Select if you
r
HDMI TV does not allow you to change the
as
p
ect
r
atio. 4:3 video will be shown with ba
r
s on each side.
Colour
RGB (0–255)
Use if colou
r
s a
r
e weak and black a
pp
ea
r
s to ‘float’ on the
RGB (16–235)
setting.
RGB (16–235)
Use this setting if colou
r
s a
pp
ea
r
ove
r
ly
r
ich and the black
too dee
p
on the
RGB (0–255)
setting.
YCbCr 4:2:2
The video signal is out
p
ut as a YCbC
r
4:2:2 com
p
onent
signal. This is the standa
r
d setting fo
r
HDMI-com
p
atible
devices.
YCbCr 4:4:4
The video signal is out
p
ut as a YCbC
r
4:4:4 com
p
onent
signal.
• Depending on the connected device some settings may not be available.
• When a DVI device is connected, the
YCbCr 4:2:2
and
YCbCr 4:4:4
options are not available.
• You cannot choose
YCbCr 4:2:2
when the
Screen Resolution
is set to
720 x 576i (720 x 480i)
.
Audio Output
Auto •
Dolby Digital, MPEG and DTS sou
r
ces a
r
e out
p
ut as a
bitst
r
eam signal. Howeve
r
, de
p
ending on the
Audio Out
setting, numbe
r
of audio channels, and the HDMI-connected
device, Linea
r
PCM audio may be out
p
ut.
PCM
All audio signals a
r
e conve
r
ted to Linea
r
PCM (exce
p
t DTS).
Bitstream
Priority
Select if the connected device is com
p
atible with bitst
r
eam
audio.
This setting is not available when a DVI device is connected.
Setting
Options
Explanation
DVR560HX_WV_EN.book 144 ページ ２００８年２月２２日 金曜日 午後７時２６分
