Pioneer DVR-530H-AV, Operating Insructions

Page: 33 / 156

Additional information
07
33
En
English
Chapter 7
Additional information
Setting the sleep timer
The sleep timer switches off the receiver subwoofer after
a specified time so you can fall asleep without worrying
about it.
1
1 Press SHIFT+SYSTEM SETUP.
2 Hold SHIFT and use the
/
buttons to select
SLEEP then press SHIFT+ENTER.
3 Hold SHIFT and use the
/
buttons to select an
option then press SHIFT+ENTER.
Choose between the following options:
• SLP ON – Switches off after about an hour
• SLP OFF – Cancels the sleep timer
After selecting SLP ON , you can select SLEEP again to
check how much time is left. Each line indicates
approximately 12 minutes (remaining):
Dimming the display
You can choose to dim the display if you find it too bright.
1 Press SHIFT+SYSTEM SETUP.
2 Hold SHIFT and use the
/
buttons to select
DIMMER then press SHIFT+ENTER.
3 Hold SHIFT and use the
/
buttons to select
LIGHT or DARK then press SHIFT+ENTER.
DTS CD setting
If you play a DTS-encoded CD, you will need to change
this setting to hear the decoded signal.
1 Switch the system into standby.
2 Press SHIFT+SYSTEM SETUP.
3 Hold SHIFT and use the
/
buttons to select
CD TYPE from the menu, then press SHIFT + ENTER.
4 Hold SHIFT and use the
/
buttons to select a
setting, then press SHIFT + ENTER .
Select from:
•
NORMAL
– Use for playback of regular audio CDs.
Some DTS-encoded CDs will output noise when
played.
• DTS-CD – Use for playback of DTS-encoded CDs, but
note that there may be a slight loss of regular audio
CD playback quality.
Resetting the system
Use this procedure to reset all system settings to the
factory default.
1 Switch the system on.
2 Press SURROUND while holding down the front
panel STANDBY/ON button.
The next time you switch on, all the system settings
should be reset.
Note
1 The display dims when the sleep timer is set. The DVD recorder does not automatically switch off with the sleep timer.
S L P - - - - -
SX-SW77.book Page 33 Wednesday, April 27, 2005 6:05 PM