Pioneer DVR-3100, Operating Instructions Manual

Page: 56 / 172

Using the GUIDE Plus+® electronic program guide 05
56
En
• VPS/PDC works only with analog
stations; it does not work with digital TV
stations.
• VPS/PDC may not work with all
broadcast stations in your country/area.
Check with the stations for compatibility.
• The hours between 3:00 and 5:00 in the
morning are used by the GUIDE Plus+
system to download program
information. During these times, VPS/
PDC may not work reliably; leave VPS/
PDC off if you set a timer recording for
these times.
Extending a timer recording in
progress
You can extend a timer recording beyond the
programmed end time. This can be useful if
a broadcast program overruns, for example.
Canceling or extending the timer
1 Press and hold for three seconds
during a timer recording.
Recording continues, but the timer indicator
disappears from the front panel display
indicating that the timer has been canceled.
2 Press repeatedly to extend
recording in 30 minute blocks.
Stopping a timer recording
1 Press during a timer recording.
2 Select ‘Yes’ to confirm.
Preventing use of the recorder before a
timer recording (child lock)
You can make all the front panel and remote
control buttons inoperative using the child
lock feature. This is useful when you set a
timer recording and want to make sure that
the timer settings are not changed before
recording has finished.
1 If the recorder is on, switch it
into standby.
2 [Front panel] Press and hold for
three seconds to lock the controls.
The front panel display briefly shows
LOCK
.
If any buttons are pressed on the remote or
front panel,
LOCK
is briefly displayed again.
• To unlock the recorder, press and hold
STOP on the front panel (while the
recorder is stopped) for three seconds
until the display shows
UNLOCK .
REC
REC
STOP REC
ENTER
STANDBY/ON
DVR940HX_UK_EN.book 56 ページ ２００６年７月１２日 水曜日 午後４時５分