Pioneer DVR-3100, Operating Instructions Manual

Page: 139 / 172

The Initial Setup menu 16
139
En
Channel Sort Next Screen
Use this screen to sort channel presets into your
prefered order. Use the
///
buttons to
highlight the channel you want to move, press
ENTER
. Use the cursor buttons again to highlight the
position you want to move the channel preset to,
then press
ENTER
again.
(If there are more channel presets than will fit on one
screen, you can select the next/previous page by
highlighting the small triangular marks and pressing
ENTER
.)
Channel Options Next Screen From this screen you can skip or lock channels.
Locked channels will require the correct password to
be entered before the channel can be watched. Use
the
///
buttons to highlight a preference box
and press ENTER to toggle the preference.
To enter this screen, input the parental lock password
when prompted (if one has not yet been set then the
password you enter becomes the parental lock
password).
Auto Skip Off •
No channels are automatically skipped.
Radio
Radio channels are skipped when selecting
channels.
Data
Data channels are skipped when selecting channels.
Radio & Data
Radio and data channels are skipped when selecting
channels.
Signal Check Next Screen
Use this screen to check the signal level and quality
of digital channels. Use the
/
buttons to change
the RF channel; select Add New Channels then
press ENTER to scan for new channels; press HOME
MENU to exit.
Aerial Power On Power is supplied to the connected aerial (antenna)
when this recorder is on or in standby.
Auto Power is supplied to the connected aerial (antenna)
only when this recorder is on.
Off • This recorder does not supply power to the
connected aerial (antenna).
• If the setting keeps reverting to Off when you try to set to On or Auto , the aerial may not be connected properly,
or it may be shorted. In either case, check the connection and try making the setting again.
Setting Options Explanation
DVR940HX_UK_EN.book 139 ページ ２００６年７月１２日 水曜日 午後４時５分