The Initial Setup menu
16
142
En
AV2/L1 In
Video •
Sets the
AV2(INPUT 1/DECODER)
SCART input to
standard composite video.
S-Video
Sets the
AV2(INPUT 1/DECODER)
SCART input to S-
video.
RGB
Sets the
AV2(INPUT 1/DECODER)
SCART input to
RGB.
Decoder
Use this setting if you connected a decoder to the
AV2(INPUT 1/DECODER)
SCART connector. For
scrambled channels, make sure that the channel
Decoder
setting is set to
On
. (See
Manual CH Setting
page 140.)
When the Input Line System is set to
525 System
,
RGB
cannot be selected.
Even when set to
RGB
. depending on the connected device, the input signal may be composite video.
NTSC on PAL TV
On •
NTSC discs will play correctly on PAL-only TVs.
Off
Use if your TV is already NTSC-compatible.
Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating
instructions that came with your TV. See also About NTSC on PAL TV on page 151 for related information.
Audio In
NICAM Select
NICAM •
Record the NICAM audio in a NICAM broadcast.
Regular Audio
Record the non-NICAM audio in a NICAM broadcast.
(You can still switch the audio to record using the
AUDIO
button before recording.)
Analog Tuner Level Normal •
Standard setting.
Compression
Use if the audio level from the built-in tuner is exces-
sive, causing distortion.
External Audio
Stereo •
Select if the audio from the currently selected exter-
nal input is standard stereo.
Bilingual
Select if each channel carries a separate soundtrack.
When the external audio is from the DV input, an audio subcode channel within the DV audio tells the recorder
whether the audio is stereo or bilingual. This has priority over the setting you make here.
Bilingual Recording A/L •
Record the left (A) channel of a bilingual source
when recording to HDD with HDD Recording Format
set to Video Mode On, to DVD in Video mode or in
LPCM
mode, from an external source.
B/R
As above, but for right (B) channel recording.
When recording bilingual audio to DVD in VR mode (except in
LPCM
mode), or to HDD with HDD Recording Format
set to Video Mode Off (except in
LPCM
mode), both audio channels are recorded and you can switch to the one you
want on playback.
Setting
Options
Explanation
DVR940HX_UK_EN.book 142 ページ ２００６年７月１２日 水曜日 午後４時５分
Summary of Contents for DVR-3100
Page 1: ...uk ...
Page 170: ...Additional information 17 170 En ...
Page 171: ...Additional information 17 171 En ...
Page 172: ......
