Pioneer DVH-P500UB, Operation Manual

Page: 44 / 96

Low: 40HZ
—
80HZ
—
100HZ
—
160HZ
Mid: 200HZ
—
500HZ
—
1KHZ
—
2KHZ
High: 3KHZ
—
8KHZ
—
10kHZ
—
12KHZ
4 Push MULTI-CONTROL up or down to
select the desired Q factor.
Each time
MULTI-CONTROL
is pushed up or
down, Q factor is selected in the following
order:
2W
—
1W
—
1N
—
2N
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Use MULTI-CONTROL to select
LOUDNESS.
Refer to Introduction of audio adjustments on
page 42.
2 Press MULTI-CONTROL to turn loudness
on.
Loudness level (e.g., MID ) appears in the dis-
play.
#
To turn loudness off, press
MULTI-CONTROL
again.
3 Push MULTI-CONTROL left or right to
select a desired level.
Each time MULTI-CONTROL is pushed left or
right, level is selected in the following order:
LOW
(low)
—
MID
(mid)
—
HIGH
(high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
Also, phase can be selected between normal
and reverse.
1 Use MULTI-CONTROL to select SUB W1.
Refer to Introduction of audio adjustments on
page 42.
2 Press MULTI-CONTROL to turn subwoo-
fer output on.
NORMAL
appears in the display. Subwoofer
output is now on.
#
If the subwoofer output phase has been set to
the reverse, REV will be displayed.
#
To turn subwoofer output off, press
MULTI-CONTROL again.
3 Push MULTI-CONTROL left or right to
select the phase of subwoofer output.
Push MULTI-CONTROL left to select reverse
phase and
REV
appears in the display. Push
MULTI-CONTROL
right to select normal phase
and
NORMAL
appears in the display.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
!
When the subwoofer output is on, you can
select
SUB W2 .
1 Use MULTI-CONTROL to select SUB W2.
Refer to Introduction of audio adjustments on
page 42.
2 Push MULTI-CONTROL left or right to
select cut-off frequency.
Each time MULTI-CONTROL is pushed left or
right, cut-off frequencies are selected in the
following order:
50
—
63
—
80
—
100
—
125
3 Push MULTI-CONTROL up or down to
adjust the output level of the subwoofer.
+6
to
–
24 is displayed as the level is increased
or decreased.
Operating this unit
En
44
Section
02