Pioneer DV-7474, Operating Instructions Manual

Page: 28 / 188

28
En
Connecting Up
2
AV CONNECTOR 2 AV CONNECTOR 1 (RGB)-TV
VIDEO
OUT
S-VIDEO
OUT
OPTICAL
IN
OUT
COAXIAL
SUB
WOOFER
CENTER
SURROUND FRONT
1
P R P B Y
2
1
1
2
L
L
R
R
2
AUDIO OUT
(5.1CH)
DIGITAL OUT
CONTROL
AUDIO OUT
(2CH)
COMPONENT VIDEO OUT
AC IN
1
2
Home theater video connections
This player outputs video in a number of different ways.
Choose the one most suitable for your system using the
guide below.
Important
Before making or changing any rear panel connections, make sure
that all components are switched off and unplugged from the wall
outlet.
Connecting SCART and S-Video cables
SCART and S-Video cables will only plug in one way, so
make sure the plug is correctly lined up with the jack before
inserting. Be sure to fully insert for a good connection.
Note
The AV CONNECTOR 1(RGB)-TV connector can output
composite, S-Video or RGB component video; the AV CONNEC-
TOR 2 SCART connector only outputs composite video. If you
connect just one TV, use the AV CONNECTOR 1(RGB)-TV
connector. You can select the type of video output by changing the
Video Out setting in the Setup Menu ( page 124 ).
S-Video or composite video?
S-Video should give a better picture, so if you have an S-
Video input, use it. S-Video cables are available from any
good audio/visual dealer.
If your TV has a SCART input, we recommend using it to connect
directly to the
AV CONNECTOR 1 (RGB)-TV or AV CONNECTOR
2 output on this player.
If a SCART input is not available to you, connect this player to your TV or
AV receiver using either the
VIDEO or S-VIDEO jacks.