Pioneer DJM 3000 - Professional DJ Mixer, Service Manual

Page: 96 / 107

DJM-3000
96
1 2 3 4
1 2 3 4
C
D
F
A
B
E
7. GENERAL INFORMATION
7.1 DIAGNOSIS
How to Enter the Test Mode
1. Power supply OFF
2. EFFECT MIX: OFF
3. Turn ON the power while pressing the EFFECT Key and ROLL Key.
When entered the test mode, [ F] is displayed on the lower 7 seg and test mode starts when releases the Key.
Then the LED indication (lighting) will change when presses the EFFECT key as follows.
4. When release from the test mode, return to normal mode by turn on the power once again in the status that nothing
presses.
Level Meter 7 SEG BPM CH BPM H/L EFFECT CH BEAT LED
1
Lights out All "0" display Lights out Lights out CH-1 lighting 1/2 LED lighting
2
-15 lighting All "1" display CH-1 lighting LowLED lighting CH-2 lighting 2/3 LED lighting
3
-10 lighting All "2" display CH-2 lighting HighLED lighting CH-3 lighting 1/1 LED lighting
4
-7 lighting All "3" display CH-3 lighting
Repeat
1
to
3
afterward
CH-4 lighting 2/1 LED lighting
5
-4 lighting All "4" display CH-4 lighting MIC lighting 4/1 LED lighting
6
-2 lighting All '5' display
Repeat
1
to
5
afterward
Master lighting
Repeat
1
to
5
afterward
7
0 lighting All "6" display
Repeat
1
to
6
afterward
8
2 lighting All "7" display
9
5 lighting All "8" display
0
9 lighting All "9" display
-
14 lighting
Repeat
1
to
0
afterward
Repeat
2
to
=
afterward
=
-22 lighting
Indication A/B FADER START EFFECT MIX Key CH Monitor EFFECT Key
1
Lights out Lights out Lights out Lights out Lighting
2 Indication A lighting CH1 lighting ECHO lighting CH-1 monitor lighting Lighting
3
7
Indication B lighting CH2 lighting ZIP lighting CH-2 monitor lighting
Effect monitor lighting
Lights out
4
CH3 lighting ROLL lighting CH-3 monitor lighting
Repeat
1
to
3
afterward
Repeat
1
to
3
afterward
5 CH4 lighting CH-4 monitor lighting
Master monitor
lighting
6
Repeat
2
to
5
afterward
Repeat
2
to
4
afterward
Repeat
2
to
7
afterward