Pioneer DJM 3000 - Professional DJ Mixer, Service Manual

Page: 107 / 107

DJM-3000
107
5 6 7 8
5 6
7
8
C
D
F
A
B
E
≠
Effect beat selector switches (
@
,
#
)
Use this switch to change the value of Effect PARAMETER 1
control (
‹
) in accordance with the BPM of the source
selected with the Effect CH. SELECT switch (
¤
). The setting
value of this switch differs depending on the setting of the
Effect selector switch (
⁄
).
¶
When DELAY, ECHO, PAN, or TRANS are selected, the
parameter 1 value for the BPM of the selected source can be
set to 1/4 beat, 1/2 beat, 1/1 beat, 2/1 beat, 4/1 beat, or 8/1
beat.
¶
When DELAY or ECHO are selected, values can be set to
1/4x, 1/2x, 1/1x, 2/1x, 4/1x or 8/1x, within a range such that
the parameter 1 value does not exceed 3500 ms.
¶
When FILTER or FLANGER are selected, the parameter 1
value for the BPM of the selected source can be set to 1/2
beat, 1 beat, 2 beats, 4 beats, 8 beats, 16 beats, or 32 beats.
¶
When PITCH is selected, the value can be set to –100%,
–50%, –33%, 0%, 33%, 50%, or 100%.
¶
When REVERB is selected, the value can be set to 10%,
20%, 35%, 50%, 65%, 80%, or 90%.
¶
This control is disabled when AUTO BPM or SND/RTN
are selected.
Ÿ
H.P CUE (Headphones cue switch)
When this switch is pressed it lights orange, and beat effects
are output to the headphones. Pressing the switch again
disconnects the beat effect to the headphones and turns off the
switch lamp.
⁄
Effect selector switch
Use to select desired effects.
¤
CH. SELECT (Effect channel selector switch)
Use to select the source you wish to apply effects to.
‹
TIME (PARAMETER 1)
(Effect parameter 1 control)
This control is used to set the time parameter for the onboard
effector.
›
LEVEL/DEPTH (PARAMETER 2)
(Effect parameter 2 control)
This control is used to set quantitative parameters for the
onboard effector.
fi
ON/OFF, TAP (Effect ON/OFF switch, TAP switch)
This switch produces different operations depending on the
setting of the Effect selector switch (
⁄
)
¶
When DELAY, ECHO, PAN, TRANS, FILTER,
FLANGER, REVERB, PITCH, or SND/RTN are selected,
the switch operates to turn the selected effect ON/OFF.
OFF: the orange lamp lights; ON: orange lamp flashes.
¶
When AUTO BPM is selected the switch becomes a “TAP”
switch; by tapping the switch together with the source beat,
the BPM can be input manually.
When tapping the TAP switch to count the BPM, both BPM
counter range displays (70-139 BPM and 91-180 BPM) go
out, and the manual mode is enabled.
Å
EFFECT MIX Controls
fl
FADER/OFF/AUTO (EFFECT MIX selector switch)
Use to select the cross fader effect mode.
FADER: Selects Effect Mix Fader mode. When this is
selected, the Cross fader lever (
™
) can be used to
control effects and perform cue start and back cue.
OFF: Normal mode
AUTO: The Effect Mix Auto mode. When this is selected,
the Effect select/start switches (
‡
,
°
,
·
) can be
used to control effects, perform cue start and back
cue.
‡
,
°
,
·
Effect select/start switches
Use to select the type of Effect Mix desired (default is ECHO)
¶
The switch for the selected function flashes.
‡
ECHO switch
°
ZIP switch
·
ROLL switch