Pioneer DJM 3000 - Professional DJ Mixer, Service Manual

Page: 104 / 107

DJM-3000
104
1 2 3 4
1 2 3 4
C
D
F
A
B
E
8. PANEL FACILITIES
8.1 PANEL FACILITIES
Control Panel
¥
MIC (Microphone Controls)
1
MIC 1 input jack
Use to connect a microphone with either XLR or PHONE type
jack.
2
TREBLE control
Adjusts high-range frequencies on microphone 1 and 2.
Center click position is provided for flat response.
Rotate the knob clockwise to augment treble response (to
+12dB), and rotate counterclockwise to diminish treble
response (to –12 dB).
3
BASS control
Adjusts low-range frequencies on microphone 1 and 2.
Center click position is provided for flat response.
Rotate the knob clockwise to augment bass response (to
+12dB), and rotate counterclockwise to diminish base
response (to –12 dB).
4
MIC 1 LEVEL
Controls sound volume on microphone 1 (attenuation:
–
∞
to 0 dB)
5
MIC 2 LEVEL
Controls sound volume on microphone 2 (attenuation:
–
∞
to 0 dB)
6
MIC switch
Use to select microphone input.
OFF: Disables microphone 1 and 2
ON: Enables microphone 1 and 2
TALK OVER: Enables microphone 1 and 2 while attenuating
other sound levels. The amount of attenuation can be
controlled by setting the rear-panel TALK OVER LEVEL,
within the range –4 dB to –20 dB.
ø
CH-1 to CH-4 (Channel Input Controls)
7
Input selector switches
Use to select an input source from among the components
connected to the various channels.
CH-1: Switches between LINE 1 and PHONO 1/LINE 2
CH-2: Switches between LINE 3 and PHONO 2/LINE 4
CH-3: Switches between LINE 5 and PHONO 3/LINE 6
CH-4: Switches between LINE 7 and MIC 3/PHONO 4
¶
On CH-1 to CH-3, the rear panel PHONO/LINE switches
are used to switch between PHONO 1, 2, 3 and LINE 2, 4,
and 6.
¶
On CH-4, switching between MIC 3 and PHONO 4 is based
on the presence/absence of a plug in the MIC 3 connector
(when a plug is inserted, MIC 3 is selected).
8
TRIM control
Use to control the input signal level.
Rotate clockwise to increase the level (to +9 dB); rotate
counterclockwise to decrease the level (to –
∞
)
9
HI control (high-range equalizer)
Use to adjust high-range frequency of input.
When the dial is set to the center click setting, flat response is
provided.
Rotate clockwise to increase response (to +12 dB), and rotate
counterclockwise to decrease response (to –26 dB).
0
MID control (mid-range equalizer)
Use to adjust mid-range frequency of input.
When the dial is set to the center click setting, flat response is
provided.
Rotate clockwise to increase response (to +12 dB), and rotate
counterclockwise to decrease response (to –26 dB).
-
LOW control (low-range equalizer)
Use to adjust low-range frequency of input.
When the dial is set to the center click setting, flat response is
provided.
¥ ø π [
“
]
\ ‘
1
7
8
2
3
4
5
6
9
0
-
~
!
7
9
0
-
~
!
7
9
0
-
~
!
7
9
0
-
~
! %
@
^
&
*
#
$
(
)
_ + ™ ¡ £ ¢
8 8 8
= = = =