Pioneer DEH-X7550SD, Owner'S Manual

Page: 15 / 156

Phone (phone color setting)
You can select the desired key colors to display
when an incoming call is received.
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select the desired setting.
You can select any one of the options in the fol-
lowing list:
!
Flashing
–
The color selected from Key
Side flashes.
!
Flash FX 1
to
Flash FX 6
–
The system auto-
matically cycles through all available key
colors for this unit. Select the desired
mode.
!
OFF
–
No change in key color made when
incoming calls are received.
Notes
!
The MIX / DISP OFF color cannot be changed.
!
When Scan is selected, the system automati-
cally cycles through the preset colors.
!
When
Warm
is selected, the system auto-
matically cycles through the warm colors.
!
When Ambient is selected, the system auto-
matically cycles through the ambient colors.
!
When Calm is selected, the system automati-
cally cycles through the calm colors.
!
When Custom is selected, the customized
color saved is selected.
Customizing the
illumination color
You can create custom illumination colors for
both
Key Side
and
Display Side
.
1 Press M.C. to display the main menu.
2 Turn M.C. to display ILLUMINATION and
press to select.
3 Turn M.C. to display Key Side or
Display Side. Press to select.
4 Press M.C. and hold until the customizing
illumination color setting appears in the dis-
play.
5 Press M.C. to select the primary color.
R (red)
—
G (green)
—
B (blue)
6 Turn M.C. to adjust the brightness level.
Adjustment range:
0
to
60
#
You cannot select a level below 20 for all three of
R
(red),
G
(green), and
B
(blue) at the same time.
#
You can also perform the same operation on
other colors.
Note
You cannot create a custom illumination color
while
Scan , Warm , Ambient or Calm is se-
lected.
About MIXTRAX
MIXTRAX technology is used to insert a variety
of sound effects in between songs, allowing you
to experience your music as a nonstop mix com-
plete with visual and lighting effects.
Notes
!
Depending on the file/song, sound effects
may not be available.
!
MIXTRAX includes a MIXTRAX flashing color
mode that when switched on turns the flash-
ing colors on and off in time with the audio
track. If you find the feature distracting while
driving, please turn MIXTRAX off. Refer to
Op-
erations using the MIXTRAX button on page 7.
MIXTRAX menu
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select MIXTRAX.
3 Turn M.C. to select the MIXTRAX func-
tion.
Once selected, the following MIXTRAX functions
can be adjusted. The function is enabled when
MIXTRAX is on.
SHORT PLAYBACK
(short playback mode)
You can select the length of the playback time.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
1.0 MIN (1.0 minute)
—
1.5 MIN (1.5 minutes)
—
2.0 MIN (2.0 minutes)
—
2.5 MIN (2.5 minutes)
—
3.0 MIN (3.0 minutes)
—
Random (random)
—
OFF
(off)
!
Turn this option OFF if you want to play a selec-
tion all the way through from start to finish.
FLASH AREA (flash area)
You can select areas for flashing colors.
1
Press M.C. to display the setting mode.
2
Turn M.C. to select the desired setting.
Key & Display (key and display)
—
KEY SIDE
(key section)
—
OFF (off)
!
When
KEY SIDE
is selected, the illuminated
sections on the left side on the front of this
unit flash.
!
When OFF is selected, the color set under IL-
LUMINATION is used as the display color.
Flashing Color (flash pattern)
You can select flashing color patterns.
1
Press M.C. to display the setting mode.
2
Turn
M.C.
to select the desired setting.
You can select any one of the options in the fol-
lowing list:
!
Sound Level Mode Color 1 to Color 6
–
Flashing colors will flash on and off in syn-
chronization with the sound level in a
song. Select the desired mode.
!
Low Pass Mode Color 1 to Color 6
–
Flashing colors will flash on and off in syn-
chronization with the bass level in a song.
Select the desired mode.
!
Flashing Color Random
–
The pattern for
the flashing colors is randomly selected for
each song from the sound level mode and
low pass mode.
!
Sound Level Mode Random
–
The pattern
for the flashing colors is randomly selected
for each song from the sound level mode.
!
Low Pass Mode Random
–
The pattern for
the flashing colors is randomly selected for
each song from the low pass mode.
DISP EFFECT (display effect)
The MIXTRAX special effects display can be turned
on or off.
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the desired setting.
MIXTRAX 1 (MIXTRAX special effects dis-
play 1)
—
MIXTRAX 2 (MIXTRAX special effects
display 2)
—
OFF (normal display)
CUT IN EFFECT (manual cut-in effect)
You can turn on or off the MIXTRAX sound effects
while manually changing tracks.
1
Press M.C. to select the desired setting.
ON
(on)
—
OFF
(off)
MIX Settings (MIXTRAX settings)
For details, refer to MIXTRAX settings on the next
page.
English
Using this unit
15
Section
Using this unit
En
02