1
Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2
Use MULTI-CONTROL to select SLA.
3
Push MULTI-CONTROL up or down to
adjust the source volume.
Each time
MULTI-CONTROL
is pushed up or
down, source volume increases or decreases.
SLA +4
to
SLA
–
4
is displayed as the source
volume is increased or decreased.
Notes
!
The AM tuner volume level can also be ad-
justed with source level adjustments.
!
The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
!
External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Initial Settings
Adjusting initial settings
1
1
1
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1
Function display
Shows the function status.
1
Press SOURCE and hold until the unit
turns off.
2
Press MULTI-CONTROL and hold until
Language select appears in the display.
3
Turn MULTI-CONTROL to select one of
the initial settings.
Turn
MULTI-CONTROL
to switch between the
functions in the following order:
Language select
(language selection)
—
Clock
(clock)
—
Warning tone
(warning tone)
—
Face auto open
(face auto open)
—
AUX1
(auxiliary input 1)
—
AUX2
(auxiliary input 2)
—
Dimmer
(dimmer)
—
Brightness
(brightness)
—
S/W control
(rear output and subwoofer
controller)
—
Mute
(sound muting/attenua-
tion)
—
Demonstration
(feature demo)
—
Reverse mode
(reverse mode)
—
Ever-scroll
(ever scroll)
—
BT AUDIO
(Bluetooth audio)
—
Pin code input
(pin code input)
Use the following instructions to operate each
particular setting.
#
You can also select the function by pressing
FUNCTION
on the remote control.
#
BT AUDIO
and
Pin code input
can be se-
lected only when Bluetooth adapter (e.g., CD-
BTB100) is connected to this unit.
#
To cancel initial settings, press
BAND
.
Operating this unit
En
29
English
Section
02
