Using balance adjustment
You can change the fader/balance setting so
that it can provide you an ideal listening envir-
onment in all occupied seats.
1
Use MULTI-CONTROL to select Fader.
#
If the balance setting has been previously ad-
justed,
Balance
will be displayed.
2
Push MULTI-CONTROL up or down to
adjust front/rear speaker balance.
Each time
MULTI-CONTROL
is pushed up or
down, the front/rear speaker balance moves
towards the front or rear.
F 15
to
R 15
is displayed as the front/rear
speaker balance moves from front to rear.
#
F/R 0
is the proper setting when only two
speakers are used.
#
When the rear output setting is
Rear SP :S/W
,
you cannot adjust front/rear speaker balance.
Refer to
Setting the rear output and subwoofer
controller
on page 31.
3
Push MULTI-CONTROL left or right to
adjust left/right speaker balance.
Each time
MULTI-CONTROL
is pushed left or
right, the left/right speaker balance moves to-
wards the left or right.
L 15
to
R 15
is displayed as the left/right
speaker balance moves from left to right.
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display
Equalizer curve
Powerful
Powerful
Natural
Natural
Vocal
Vocal
Custom1
Custom 1
Custom2
Custom 2
Flat
Flat
S.Bass
Super bass
!
Custom1
and
Custom2
are adjusted equal-
izer curves that you create. Adjustments
can be made with a 7-band graphic equali-
zer.
!
When
Flat
is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat
and a set equalizer curve.
%
Press EQ to select the equalizer.
Press
EQ
repeatedly to switch between the fol-
lowing equalizers:
Powerful
—
Natural
—
Vocal
—
Custom1
—
Custom2
—
Flat
—
S.Bass
Adjusting equalizer curves
The factory supplied equalizer curves, with the
exception of
Flat
, can be adjusted to a fine de-
gree (nuance control).
1
Use MULTI-CONTROL to select the gra-
phic equalizer adjustment.
Powerful
appears in the display.
If the equalizer curve has been previously se-
lected, the curve of that previously selected
will be displayed instead of
Powerful
.
2
Push MULTI-CONTROL left or right to
select an equalizer curve.
Each time
MULTI-CONTROL
is pushed left or
right, equalizer curves are selected in the fol-
lowing order:
Powerful
—
Natural
—
Vocal
—
Custom1
—
Custom2
—
Flat
—
S.Bass
3
Push MULTI-CONTROL up or down to
adjust the equalizer curve.
Each time
MULTI-CONTROL
is pushed up or
down, the equalizer curve increases or de-
creases respectively.
Operating this unit
En
26
Section
02
