Listening to the radio
1
2 3 4
5
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1
Stereo (ST) indicator
Shows that the frequency selected is being
broadcast in stereo.
2
LOC indicator
Shows when local seek tuning is on.
3
Band indicator
Shows which band the radio is tuned to, AM
or FM.
4
Preset number indicator
Shows what preset has been selected.
5
Frequency indicator
Shows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press
SOURCE
until you see
Tuner
displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND to select a band.
Press
BAND
until the desired band is dis-
played,
FM1
,
FM2
,
FM3
for FMor
AM
.
4 To performmanual tuning, press
c
or
d
with quick presses.
The frequencies move up or down step by
step.
5 To performseek tuning, press and hold
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by pressing either
c
or
d
with a quick press.
#
If you press and hold
c
or
d
you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Note
When the frequency selected is being broadcast
in stereo the stereo (
ST
) indicator will light.
Tuner
En
12
Section
04
HHHHHHHHHHHHHH
Summary of Contents for DEH-P6500
Page 89: ...Fr 89 Français HHHHHHHHHHHHHH ...
Page 90: ...Fr 90 HHHHHHHHHHHHHH ...
Page 91: ...Fr 91 Français HHHHHHHHHHHHHH ...