Attaching the front panel
%
Replace the front panel by holding it
upright to this unit and clipping it securely
into the mounting hooks.
About the demo mode
This unit features two demonstration modes.
One is the reverse mode, the other is the fea-
ture demo mode.
!
You cannot cancel a demo mode when the
front panel is open.
Important
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
Reverse mode
If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds. Pressing
5
numbered button when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON cancels the re-
verse mode. Pressing
5
numbered button
again to start the reverse mode.
Feature demo
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON. Pressing
6
numbered button during feature demo opera-
tion cancels the feature demo mode. Pressing
6
numbered button again to start the feature
mode. Remember that if the feature demo
continues operating when the car engine is
turned off, it may drain battery power.
About the operation mode
This unit features two operation modes, opera-
tion mode 1 and 2. Operation mode 1 enables
you to operate all the functions of this unit.
Operation mode 2 enables you to operate the
basic functions for each source easily. This
manual explains operation mode 1. Please
refer to
Using the operation mode 2
on page 35
for operation mode 2.
Before You Start
En
8
Section
01
HHHHHHHHHHHHHH
Summary of Contents for DEH-P6500
Page 89: ...Fr 89 Français HHHHHHHHHHHHHH ...
Page 90: ...Fr 90 HHHHHHHHHHHHHH ...
Page 91: ...Fr 91 Français HHHHHHHHHHHHHH ...