Adjusting non fading output level
When the non fading output is on, you can ad-
just the level of non fading output.
1 Press AUDIO to select non fading out-
put setting.
Press
AUDIO
until
NonFad 0
appears in the
display.
2 Press
a
or
b
to adjust the output level
of the non fading.
Each press of
a
or
b
increases or decreases
the level of the non fading.
+6
6
is displayed
as the level is increased or decreased.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn the HPF
(high pass filter) on. Only frequencies higher
than those in the selected range are output
from the front or rear speakers.
1 Press AUDIO to select HPF.
Press
AUDIO
until
HPF
appears in the display.
2 Press
a
to turn high pass filter on.
HPF 80 Hz
appears in the display. High pass
filter is now on.
#
To turn high pass filter off, press
b
.
3 Press
c
or
d
to select cut-off frequency.
Each press of
c
or
d
selects cut-off frequen-
cies in the following order:
50
80
125
(Hz)
Only frequencies higher than those in the se-
lected range are output from the front or rear
speakers.
Note
If you switch the SFEQ setting, the HPF function
is automatically turned off. By turning the HPF
function on after selecting the SFEQ setting, you
can combine HPF function with SFEQ
function.
Adjusting source levels
SLA (source level adjustment) lets you adjust
the volume level of each source to prevent ra-
dical changes in volume when switching be-
tween sources.
!
Settings are based on the volume level of
the FMtuner, which remains unchanged.
1 Compare the FM tuner volume level
with the level of the source you wish to ad-
just.
2 Press AUDIO to select SLA.
Press
AUDIO
until
SLA
appears in the display.
3 Press
a
or
b
to adjust the source vo-
lume.
Each press of
a
or
b
increases or decreases
the source volume.
SLA +4
SLA
4
is displayed as the source vo-
lume is increased or decreased.
Notes
!
Since the FMtuner volume is the control, it is
not possible to apply source level adjustments
to the FMtuner.
!
The AMtuner volume level can also be ad-
justed with source level adjustments.
!
The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
!
External unit 1 and external unit 2 are set to
the same source level adjustment volume
automatically.
Audio Adjustments
En
31
English
Section
07
HHHHHHHHHHHHHH
Summary of Contents for DEH-P6500
Page 89: ...Fr 89 Français HHHHHHHHHHHHHH ...
Page 90: ...Fr 90 HHHHHHHHHHHHHH ...
Page 91: ...Fr 91 Français HHHHHHHHHHHHHH ...