Connecting the unit
English
Connecting the unit
English
When not connecting a rear speaker lead to a subwoofer
4 m (13 ft. 1 in.)
Microphone input
This product
Rear output
Front output
Antenna jack
Subwoofer output
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by
ignition switch (12 V DC).
Black (chassis ground)
Connect to a clean, paint-free metal location.
Fuse (10 A)
Fuse resister
To subwoofer
output
To front output
To rear output
IP-BUS input (Blue)
IP-BUS cable
Multi-CD player
(sold separately)
Wired remote input
Hard-wired remote control adaptor
can be connected (sold separately).
Power amp
(sold separately)
Connect with RCA cables
(sold separately)
System remote control
Power amp
(sold separately)
Power amp
(sold separately)
Microphone
Perform these connections
when using the optional
amplifier.
Blue/white
Connect to system control terminal of the power
amp or auto-antenna relay control terminal (max.
300 mA 12 V DC).
With a 2 speaker system, do not
connect anything to the speaker leads
that are not connected to speakers.
Left
Right
Front speaker
Front speaker
Rear speaker
Rear speaker
White
Gray
Gray/black
White/black
Green
Violet
Green/black
Violet/black
Front speaker
Front speaker
Rear speaker
Rear speaker
Subwoofer
Subwoofer
Connecting the unit
English
Connecting the unit
English
When using a subwoofer without using the optional amplifier
Microphone input
4 m (13 ft. 1 in.)
Microphone
Blue/white
Connect to system control
terminal of the power amp or
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
Left
Right
Front speaker
Front speaker
White
Gray
Gray/black
White/black
Green
Violet
Green/black
Violet/black
Subwoofer (4
Ω
)
Subwoofer (4
Ω
)
Green
Violet
Green/black
Violet/black
When using a subwoofer of 70 W (2
Ω
), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
Subwoofer
(4
Ω
)
2
Not used.
This product
Front output
Antenna jack
Subwoofer output
Rear output
IP-BUS input (Blue)
Wired remote input
Hard-wired remote control adaptor
can be connected (sold separately).
IP-BUS cable
Multi-CD player
(sold separately)
Yellow
Connect to the constant 12 V supply terminal.
Red
Connect to terminal controlled by ignition switch (12 V DC).
Fuse (10 A)
Fuse resister
Note:
Change the initial setting of this unit.
The subwoofer output of this unit is monaural.
Black (chassis ground)
Connect to a clean, paint-free metal location.
