57
Appendix
About AV Head Units /Displays
to be Connected
You need an AV head Unit or Display with a
touch panel feature to use this software.
If a
display that dose not have a touch panel feature
is connected, the software will not function prop-
erly. This includes Pioneer displays that do not
have touch panel features. Make sure to use a
display suitable for the system. For details, con-
sult a dealer or product catalog.
Group 1 – AV Head Unit
The type of the unit that can be a control master
with the following features (e.g. AVH-P6600DVD,
AVH-P6500DVD, and AVH-P7500DVD):
• a source unit can be connected to it directly,
and
• a built-in amplifier and display are equipped.
Group 2 – Display Type AVD
The type of the unit that has a built-in amplifier
only for the built-in speaker(s) and cannot be a
control master because other unit cannot be con-
nected to it (e.g. AVD-W6210).
Group 3 – AV system display with Master/
Slave switch
The type of the unit that has no amplifier and can
be a control master by being switched to Master
and connected with other unit(s) (e.g. AVX-
P8DVD).
Features available to each Group
*1: The AV Head Unit or Display must be set to Mute or ATT while the Guidance is being performed by
the Navigation System.
*2: Available when the GUIDE ON lead of the Navigation System is connected to the Pioneer Head Unit.
*3: Recognizable commands are Source On, Source Off, Display AV, Display Navi, Navigation Audio,
Next page, Previous page, Repeat, and Back.
Group 1
Group 2
Group 3
Master
Slave
“Touch Panel Operation When Using NAVI
Source”
➞
Page 59
X
–
X
Map Display
•
AV Guide Mode
(
➞
Page 48)
X
–
X
•
Arrow in AV
(
➞
Page 48)
X
–
X
Mute Setting
•
Voice Recognition
(
➞
Page 49)
X *1
X *1
X *2
•
Voice Guidance
(
➞
Page 49)
X *1
X *1
X *2
“Common commands for Audio operations”
➞
Page 53
X
–
X
– *3
Summary of Contents for CNDV-40MT
Page 18: ...16 ...
