Pioneer CDJ-2000, Service Manual

Page: 70 / 166

70
CDJ-2000
1 2 3 4
A
B
C
D
E
F
1 2 3 4
8 . EACH SETTING AND ADJUSTMENT
8 .1 JOG DIAL ROTATION LOAD ADJUSTMENT
TAG TRACK
/REMOVE
1. The adjustment value of adjust plate is adjusted to "0" (Refer to Fig. 2).
2. Enters the mode for checking the load on the Jog dial.
3. The jog dial is mightly rotated. Moreover, the direction of the rotation is clockwise.
4. The rotation speed and time are displayed in LCD display (Refer to Fig. 1).
The time required so that the rotation may decrease from 3 X speed to 1.5 X speed when maximum speed is only
7 X speed or more is displayed.
The average of the rotation decrease time of 5 times in all is confirmed in spec or less.
Spec: 170 ± 20 msec.
5. When the rotation decreace time is coming off from spec, the adjustment value of adjust plate is changed, and it does
from 2 of above-mentioned to 4.
JOG Check Mode : ON
JOG Check Mode : CANCEL
POWER OFF
Mode for checking the
load on the Jog dial
Maximum position
(fully clockwise direction)
• It is the mode which judges the load (light/-- heavy) numerically when rotating the JOG dial.
To increase the load
To decrease
the load
Adjust plate
Fig. 2 Adjust plate
Fig. 1 Example of displaying LCD
[Load adjustment method]
[Measuring method]
TEMPO
6 WIDE 10 16
MEMORY
OFF
POWER
TOUCH /BRAKE
POWER O N
OFF
POWER
Remove the screw fixing the adjust plate, then screw it into the hole corresponding to the value (-1, -2, -3, -4, +1, +2 or
+3) for a load to be added:
-1, -2, -3, -4 : To decrease the load
+1, +2, +3 : To increase the load