Pioneer CDJ-2000, Service Manual

Page: 54 / 166

54
CDJ-2000
1 2 3 4
A
B
C
D
E
F
1 2 3 4
Step command
Perform the serial movement of the setup by a step.
If a CUE/LOOP CALL N EXT (
d
) button is pushed, it will step up (even if it pushes PRE V (
c
) button, the stripes of the
step down are not carried out). Operation and a display of each step are as follows.
Mode Change (The end of the test movement mode)
If the MASTER TEMPO button is pushed into "test operation mode", MASTER TEMPO LED will light out, and it will
shift to the above-mentioned "player operation mode." It is indicated with [PLAYER MODE] in the indication part.
Step Action Indication Part
STEP0 : Servo All Off ALL OFF
STEP1 : Laser diode on LD O N
STEP2 : Disc presence judgment DISC SEARCH
STEP3 : Spindle on (2000 rpm) SPI N DLE O N
STEP4 : Disc sense DISC SE N SE
STEP5 : Focus serve on FOCUS O N
STEP6 : Tracking servo on TRACKI N G O N
STEP7 : Focus position coarse adjustment FOCUS POSITIO N
STEP8 : Focus gain adjustment FOCUS GAI N
STEP9 : Tracking gain adjustment TRACKI N G GAI N
STEP10 : Address lead start ADDRESS READ
CUE/LOOP CALL N EXT (
d
) button : step up