Precautions
!
Keep this manual handy as a reference for
operating procedures and precautions.
!
Always keep the volume low enough so you
can hear sounds outside of the car.
!
Protect this product from moisture.
!
If the battery is disconnected or dis-
charged, the preset memory will be erased
and must be reprogrammed.
!
Should this product fail to operate properly,
contact your dealer or nearest authorized
Pioneer Service Station.
Use and care of the remote
control
Installing the battery
Slide the tray out on the back of the remote
control and insert the battery with the plus (+)
and minus (
) poles pointing in the proper di-
rection.
!
When using for the first time, pull out the
film protruding from the tray.
WARNING
Keep the battery out of the reach of children.
Should the battery be swallowed, immediately
consult a doctor.
CAUTION
!
Use only one
CR2025 (3 V)
lithium battery.
!
Remove the battery if the remote control is not
used for a month or longer.
!
Do not recharge, disassemble, heat or dispose
of the battery in fire.
!
Do not handle the battery with metallic tools.
!
Do not store the battery with metallic materi-
als.
!
In the event of battery leakage, wipe the re-
mote control completely clean and install a
new battery.
!
When disposing of used batteries, please
comply with governmental regulations or en-
vironmental public institution
s rules that
apply in your country/area.
!
Always check carefully that you are loading
the battery with its plus (+) and minus (
)
poles facing in the proper directions.
Using the remote control
Point the remote control in the direction of the
front panel to operate.
!
The remote control may not function prop-
erly in direct sunlight.
Important
!
Do not store the remote control in high tem-
peratures or direct sunlight.
!
Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
Switching the remote control
operation mode switch
There are three remote control operation
modes on the remote control. In order to con-
trol every function of connected equipment
properly, be sure to change settings as fol-
lows:
Before You Start
En
5
English
Section
01
