Note
If you turn random play on during
DISC
and then
return to the playback display,
D.RANDOM
ap-
pears in the display.
Scanning CDs and tracks
While you are using
DISC
, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using
MCD
, the be-
ginning of the first track of each disc is played
for about 10 seconds.
1 Select the repeat range.
Refer to
Repeating play
on the previous page.
2 Press
o
to select Scan.
Press
o
until
Scan
appears in the display.
3 Press
r
to turn scan play on.
Scan :ON
appears in the display. The first 10
seconds of each track of the current disc (or
the first track of each disc) is played.
4 When you find the desired track (or
disc) press
q
to turn scan play off.
Scan :OFF
appears in the display. The track (or
disc) will continue to play.
#
If the display has automatically returned to
the playback display, select
Scan
again by press-
ing
o
.
Notes
!
After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
!
If you turn scan play on during
DISC
and then
return to the playback display,
T.SCAN
ap-
pears in the display.
Pausing CD playback
Pause lets you temporarily stop disc playback.
1 Press
o
to select Pause.
Press
o
until
Pause
appears in the display.
2 Press
r
to turn pause on.
Pause :ON
appears in the display. Play of the
current track pauses.
3 Press
q
to turn pause off.
Pause :OFF
appears in the display. Play will re-
sume at the same point that you turned pause
on.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and playback up to 99
tracks per disc, up to 100 discs (with the disc
title). (With multi-CD players sold before the
CDX-P1250 and CDX-P650, up to 24 tracks can
be stored in the playlist.)
1 Play a CD that you want to program.
Press
r
or
q
to select a CD.
2 Press
o
and hold until TITLE appears
in the display, then press
o
to select ITS.
After
TITLE
is displayed, press
o
repeatedly,
the following functions appear in the display:
TITLE
(disc title input)
ITS
(ITS program-
ming)
Multi-CD Player
En
15
English
Section
06
