Playing a CD
1
3
2
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
page.
Important
You can use the following functions only when
the remote control is set to
DEQ
mode.
1
Disc number indicator
Shows the disc currently playing.
2
Track number indicator
Shows the track currently playing.
3
Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press SOURCE to select the multi-CD
player.
Press
SOURCE
until you see
Multi-CD
dis-
played.
2 Select a disc you want to listen to with
the 1
6 buttons.
For discs located at 1 to 6, press the corre-
sponding number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as
1
for disc 7, until the disc number ap-
pears in the display.
#
You can also sequentially select a disc by
pressing
r
or
q
.
3 To perform fast forward or reverse,
press and hold
m
or
n
.
4 To skip back or forward to another
track, press
m
or
n
.
Pressing
n
skips to the start of the next
track. Pressing
m
once skips to the start of
the current track. Pressing again will skip to
the previous track.
Notes
!
When the multi-CD player performs the pre-
paratory operations,
Ready
is displayed.
!
If the multi-CD player does not operate prop-
erly, an error message such as
ERROR-11
may be displayed. Refer to the multi-CD player
owner
s manual.
!
If there are no discs in the multi-CD player ma-
gazine,
NO DISC
is displayed.
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
Multi-CD Player
En
13
English
Section
06
