Pioneer AVIC-8DVD Operation Manual Download Page 69

Page: 69 / 124

Chapter

Utilising V

arious

Inf
ormation

A message confirming deletion appears, if you click the OK button.

On this display, you can select the following options:

Select “Yes” and click the OK button.

The data you selected is deleted, and the Address Book menu appears.

Alternative option:

➲

Because deleted data cannot be restored, take extra care not to select “Delete All Destina-
tions” and “Delete all Address Book” by mistake.

■

Confirming the location contained in the Address Book on the
map

You can select a location in the Address Book and display its surroundings on the map.

Select the location to edit in the Address Book menu and move the joystick to the
left.

Select “View Map” and click the OK button.

The map of the selected area and its surroundings appears.

Delete this item :

Delete the location selected in Step 1.

Delete all Destinations :

All the items stored in Last Destination and Destination His-
tory are deleted.

Delete all Address Book :

Delete all the data in the Address Book.

No :

The display shown in Step 2 appears.

Summary of Contents for AVIC-8DVD





























































































































Search results

Summary of Contents for AVIC-8DVD

Reviews:

Related manuals for AVIC-8DVD

Brands by name

Popular brands

Pioneer AVIC-8DVD, Operation Manual

Search results

Summary of Contents for AVIC-8DVD

Reviews:

Related manuals for AVIC-8DVD

Brands by name

Popular brands