Pioneer AVIC-8DVD Operation Manual Download Page 58

Page: 58 / 124

Checking the Suggested Route

You can check information about the route between your current location and your destination.

Press the DETOUR button on the Remote Controller for over two seconds.

Check the contents on the display.

In Route Profile display, the names of the streets you drive through, and the driving dis-
tance of each street can be checked in order.

Press the NAVI button.

The map of your surroundings reappears.

■

Checking the Suggested Route from the Information menu

You can also check the information about the route from the Information menu.

Select “Information” from the Main menu and select “Route Profile”. Click the OK
button.

Check the contents on the display.

Press the NAVI button.

Name of the streets

you drive through

Driving distance

Route Profile

Summary of Contents for AVIC-8DVD





























































































































Search results

Summary of Contents for AVIC-8DVD

Reviews:

Related manuals for AVIC-8DVD

Brands by name

Popular brands

Pioneer AVIC-8DVD, Operation Manual

Search results

Summary of Contents for AVIC-8DVD

Reviews:

Related manuals for AVIC-8DVD

Brands by name

Popular brands