Pioneer AVIC-80DVD Operation Manual Download Page 104

Page: 104 / 192

102

(19)

(CANCEL ROUTE) button (XDV-P9, XDV-P90 only)

During DVD-video playback, press this for frame-by-frame reverse.

(20)

(GUIDE) button

During DVD-video playback, press this to move frame-by-frame.

(21) Numeric keypad

Use this keypad for entering numbers such as chapter numbers.

(22) CLEAR button

This is used when canceling numbers entered such as chapter numbers.

(23) AUDIO [•] button

This button is used for switching voice (language used for voice, recording type) when oper-
ating DVD player.

(24) SUB.T (DELETE) button

This button is used for switching a subtitle when operating DVD player.

(25) ANGLE (OK) button

This button is used for switching angles when operating DVD player.

➲

With some discs, the prohibited mark “

” may be displayed and operation may not be

possible.

Summary of Contents for AVIC-80DVD

































































































































































































Search results

Summary of Contents for AVIC-80DVD

Reviews:

Related manuals for AVIC-80DVD

Brands by name

Popular brands

Pioneer AVIC-80DVD, Operation Manual

Search results

Summary of Contents for AVIC-80DVD

Reviews:

Related manuals for AVIC-80DVD

Brands by name

Popular brands