Pioneer AVH-X6850DVD, Owner'S Manual

Page: 37 / 168

37
p
“ Brightness ” and “ Contrast ” are switched automatically
depending on whether the vehicle’s headlights are on or off.
p
“ Dimmer ” can be changed the setting or the time to switch
it to on or off.
 Refer to Setting the dimmer on page 36
p
The picture adjustment may not be available with some rear
view cameras.
p
The setting contents can be memorised separately.
Displaying the firmware
version
1 Display the “ System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
34
2 Touch [ System Information ].
3 Touch [ Firmware Information ].
The “ Firmware Information ” screen appears.
Displaying the open source
licences
1 Display the “ System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
34
2 Touch [ System Information ].
3 Touch [ Licence ].
The open source licences of the functions that this product is
equipped with appear.
Updating firmware
CAUTION
 The USB storage device for updating must contain only the
correct update file.
 Never turn this product off, disconnect the USB storage
device while the firmware is being updated.

You can only update the firmware when the vehicle is
stopped and the handbrake is engaged.
1 Download the firmware update files.
2 Connect a blank (formatted) USB storage
device to your computer, and then locate the
correct update file and copy it onto the USB
storage device.
3 Connect the USB storage device to this
product.
4 Turn the source off.
 Refer to Selecting a source on page 12
5 Display the “ System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
34
6 Touch [ System Information ].
7 Touch [ Firmware Update ].
8 Touch [ Continue ] to display the data transfer
mode.
p
Follow the on-screen instructions to finish updating the
firmware.
p
This product will reset automatically after the firmware
update is completed if the update is successful.
p
If an error message appears on the screen, touch the display
and perform the above steps again.
Displaying the “Audio” setting
screen
1 Press .
2 Touch , and then
.
The “ Audio ” setting screen appears.
Using fader/balance adjustment
1 Display the “ Audio ” setting screen.
 Refer to Displaying the “
Audio
” setting screen on page 37
2 Touch [ Fader/Balance ].
p
Only the balance can be adjusted when “ Network Mode ” is
selected as the speaker mode. Touch [ Balance ] and skip to
step 4.
3 Touch or to adjust the front/rear speaker
balance.
p
Set “
Front
” and “
Rear
” to “
0
” when using a dual speaker
system.
4 Touch or to adjust the left/right speaker
balance.

You can also set the value by dragging the point
on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the AV source volume
and the iPhone application volume when the navigation outputs
the guidance voice.
1 Display the “ Audio ” setting screen.
 Refer to Displaying the “ Audio ” setting screen on page 37
2 Touch [
Mute Level
].
3 Touch the item.

ATT
(default):
The volume becomes 20 dB lower than the current volume.
 Mute :
The volume becomes 0.

Off :
The volume does not change.
Audio adjustments
p
When the cursor for on time setting is placed on the left end
and the cursor for off time setting is placed on the right end,
the dimmer available time is 24 hours.
p
The time display of the dimmer duration adjusting bar is
depending on the clock display setting.

Refer to Setting the time and date on page 44
Adjusting the picture
You can adjust the picture for each source and rear view camera.
CAUTION
For safety reasons, you cannot use some of these functions
while your vehicle is in motion. To enable these functions, you
must stop in a safe place and apply the handbrake.
1 Display the screen you wish to adjust.
2 Display the “
System ” setting screen.
 Refer to Displaying the “ System ” setting screen on page
34
3 Touch [
Picture Adjustment
].
4 Touch the item to select the function to be
adjusted.

Brightness :
Adjusts the black intensity. (–24 to +24)

Contrast
:
Adjusts the contrast. (–24 to +24)
 Colour :
Adjusts the colour saturation. (–24 to +24)

Hue :
Adjusts the tone of colour (which colour is emphasised, red
or green). (–24 to +24)
 Dimmer :
Adjusts the brightness of the display. (+1 to +48)

Temperature :
Adjusts the colour temperature, resulting in a better white
balance. (–3 to +3)
p
With some pictures, you cannot adjust Hue and Colour .
 When you touch [
Rear View
], the mode changes
to the selected camera mode. By touching
[ Source ], [ Navi ] or [ Apps ], you can return to the
selected mode.
5 Touch , , , to adjust.
p
The adjustments of “
Brightness
”, “
Contrast
” and “
Dimmer
”
are stored separately when your vehicle’s headlights are off
(daytime) and on (nighttime).
< CRD4921-A >
System settings System settings Audio
adjustments
37