Adjusting the time alignment
You can adjust the distance between each
speaker and the selected position.
!
An adjusted time alignment can be memor-
ized in
CUSTOM1
,
CUSTOM2
or
CUSTOM3
.
1
Recall the time alignment setting you
want to adjust.
Refer to
Recalling time alignment settings
2
Touch ADJ. next to TIME ALIGNMENT
on the sound setting menu.
#
You cannot adjust the time alignment when
neither
FRONT LEFT
nor
FRONT RIGHT
is se-
lected in the position selector mode.
3
Touch
or
to adjust the distance be-
tween each speaker and the listening posi-
tion.
Each time you touch
or
it increases or de-
creases the distance.
0.0cm
to
500.0cm
is dis-
played as the distance is increased or
decreased.
#
You can mute the selected speaker unit by
touching
MUTE
. To cancel muting, touch
MUTE
again.
#
You cannot select speakers whose size is set
at
OFF
. (Refer to
Customizing the speaker setting
Note
You can store the adjusted setting in memory by
using
MEMORY
. For details concerning opera-
tion, refer to
Storing the adjusted audio settings in
Adjusting the speaker
output levels
You can adjust the speaker output level of
each speaker unit.
Recalling the speaker output
level settings
%
Touch SPEAKER LEVEL on the sound
setting menu to select the speaker output
level setting.
Touch
SPEAKER LEVEL
repeatedly to switch
between the following speaker output level set-
tings:
CUSTOM1
—
CUSTOM2
—
CUSTOM3
—
AUTO
—
LAST MEMORY
#
You can select
LAST MEMORY
only when the
adjusted speaker output level setting is not mem-
orized in this unit.
#
You cannot select
AUTO
when
NETWORK
has been selected. (Refer to
#
When
STANDARD
has been selected, you
cannot select
AUTO
if auto TA and EQ has not
been carried out.
Adjusting the speaker output
levels using a test tone
This function allows you to easily get the over-
all balance right among the speakers.
1
Recall the speaker output level settings
you want to adjust.
Refer to
Recalling the speaker output level set-
Audio Adjustments
En
94
Section
17