!
When selecting
2CH
(2-channel mode), you
cannot use this function. (Refer to
ing between the multi-channel output and
2-channel output
!
If both the front center and the rear speak-
ers are set to
OFF
, you cannot use this
function.
Recalling surround sound settings
%
Touch Dolby/DTS on the audio function
menu to select your favorite setting.
Touch
Dolby/DTS
repeatedly to switch be-
tween the following settings:
OFF
(off)
—
Dolby PL II/EX
(Dolby Pro Logic II/
Dolby Digital EX)
—
DTS Neo:6
(DTS Neo:6)
Using the Dolby Pro Logic II/EX
Dolby Pro Logic II creates five full-bandwidth
output channels from two-channel sources to
achieve high-purity matrix surround.
!
If both the center and the rear speakers are
set to
OFF
, you cannot use this function.
!
Dolby Pro Logic II supports up to 48kHz
sampling rate stereo source and has no ef-
fect on other types of source.
1
Touch Dolby/DTS on the audio function
menu to select Dolby PL II/EX.
Refer to
Recalling surround sound settings
2
Touch ADJ. next to Dolby/DTS.
3
Touch any of the following touch panel
keys to select the desired mode.
!
MOVIE
–
The Movie mode suitable for
movie playback
!
MUSIC
–
The Music mode suitable for
music playback
!
MATRIX
–
The Matrix mode for when FM
radio reception is weak
#
You can operate
MUSIC ADJUSTMENT
only
when
MUSIC
has been selected.
Adjusting the Music mode
You can adjust the Music mode with the fol-
lowing three controls.
!
Panorama (
PANORAMA
) extends the front
stereo image to include the surround
speakers for an exciting
“
wraparound
”
ef-
fect.
!
Dimension (
DIMENSION
) allows you to
gradually adjust the sound field either to-
wards the front or the rear.
!
Center Width Control (
CENTER WIDTH
) al-
lows center-channel sounds to be posi-
tioned between the center speaker and the
left/right speakers. It improves the left-cen-
ter-right stage presentation for both the dri-
ver and the front passenger.
1
Touch MUSIC to adjust music mode.
Refer to
Using the Dolby Pro Logic II/EX
2
Touch PANORAMA to turn the Panora-
ma control on.
#
To turn the Panorama control off, touch
PANORAMA
again.
3
Touch
or
to adjust DIMENSION (di-
mension).
Each time you touch
or
it moves the
sound towards the front or the surrounds.
+3
to
–
3
is displayed as the front/surround
speaker balance moves from front to sur-
rounds.
4
Touch
or
to adjust CENTER WIDTH
(center width control).
Each time you touch
or
it gradually
spreads the center channel sound into the
front left and right speakers over a range
0
to
7
.
Audio Adjustments
En
84
Section
17