Pioneer Eclipse PE420GP, Operation Manual, Page: 16 / 52

3. Make sure wheels are in the burnish position. Refer
to Wheel Adjustment.
Grinding and Polishing Level-S Rubber Diamond
Pads:
1. Place the machine in the Rok-Bak position. (see
Rok-Bak section)
2. Remove centering device and previously attached
pad.
CAUTION! Carefully inspect the pad holder for cracks or
damage. Replace if necessary.
3. Place Level-S rubber diamond pad face down on
the floor.
4. Attach Level-S adapter pad to Level-S rubber
diamond pad.
5. Attach pads to padholder.
CAUTION! Make sure pads are properly centered on pad
holder to reduce machine vibration.
6. Secure with pad retainer.
7. Make sure wheels are in the “grind” position.
Refer to Wheel Adjustment.
Fuses
The machine’s electrical circuit is protected by fuses,
which stops the flow of current in the event of a circuit
overload. Once a fuse blows, it must be replaced. If the
overload that caused the fuse to fail is still present, the
new fuse will fail and the problem must be corrected. DO
NOT bypass any fuse.
10