MACHINE PREPARATION
WARNING: The machine is equipped with an automatic system that
disconnects the power supply from the electrical system while the batteries are
being recharged.
WARNING: In order not to cause permanent damage to the batteries, it is
essential to avoid their complete discharge: arrange the recharge within a few
minutes of the switching on of the flashing "discharged batteries" signal.
WARNING: Never leave the batteries completely discharged, even if the
machine is not being used.
WARNING: For the daily recharging of the batteries, you must fully respect the
indications provided by the manufacturer or retailer. All installation and
maintenance operations must be carried out by specialised personnel.
WARNING: Danger of gas fumes and the leakage of corrosive liquids.
WARNING: Danger of fire: do not go near in the presence of free flames.
9.
BATTERY INDICATOR
The battery indicator is digital, with 4 fixed positions and a flashing one. The numbers which appear on
the display show the approximate charge level.
4 = maximum charge
3 = ¾ charge
2 = 2/4 charge
1 = ¼ charge
0 = discharged batteries (flashing)
WARNING: A few seconds after the appearance of the flashing “0”, the brush
motor switches off automatically. With the remaining charge it is possible to
complete the drying process before recharging.
10.
INSTRUMENT PANEL COMPONENTS
The instrument panel components are identified as follows:
1. Main switch (1)
2. Suction switch (2)
3. Solenoid valve switch (3)
4. Digital battery level indicator (4)
4
2
3
1
11
