MACHINE PREPARATION
WARNING: you are advised to only use airtight batteries in order
to avoid the leakage of acids!
WARNING: you are advised to have the electric connections
made by a qualified, APEC-trained technician.
WARNING: you are advised to always wear protective gloves in
order to avoid the risk of serious injury to your hands.
WARNING: You are advised to only lift and move the batteries
with lifting and transportation means suitable for the specific
weight and size.
7.
CONNECTING THE CONNECTOR
1. Connect the battery connector to the machine connector.
2. Re-assemble all the elements.
WARNING: This process must be carried out by qualified personnel. The
incorrect or imperfect connection of the cables to the connector can seriously
harm people and damage objects.
8.
CHARGING THE BATTERY (WITH BUILT-IN BATTERY CHARGER)
Perform a battery charging cycle before using the machine.
When replacing the battery, be sure to use batteries that are suitable for the battery charger installed
(use only 12V AGM or Gel batteries).
In order to recharge the battery:
1. Make sure the recovery tank and the solution tank are empty.
2. Move the machine near to the battery charger.
3. Remove the battery charger connector socket protection on the back of the machine (1).
4. Plug the battery charger cable (supplied with the machine) into the freed socket.
5. Plug the battery charger cable into the mains socket.
6. For the correct use of the battery charger, follow the instructions in the enclosed booklet.
WARNING
: If one of the three LEDs flashes, refer to the battery
charger manual supplied with the machine.
10
