WORK
1.
PREPARING TO WORK
Before fitting the tanks, it is necessary to carry out certain operations:
1. Open the two rear hinges of the battery compartment.
2. Connect the connector to the batteries.
3. Close the battery compartment.
4. Position the recovery tank on the handle bars, and connect the two tubes.
1. Carry out the operations to prepare the machine.
2. Lower the squeegee command lever in order to start working.
1. Press the main switch (1) and check to make sure that the green indicator light
comes on.
2. Press the sucion switch. (2)
3. Press the solenoid valve switch. (3)
At this point – by using the operating lever that activates the brushes (4) – the
machine can work efficiently until the detergent solution runs out or the batteries
run flat.
2.
OVERFLOW DEVICE
The machine is fitted with a ball filter which is activated when the recovery tank is full, causing the suction
tube to close.
In this case, you must switch off the machine and empty the recovery tank.
WARNING: This operation must be carried out by wearing gloves to protect
against contact with dangerous solutions.
2
3
1
4
14
