PIONEER DJ DJM-V10-LF Manual Download Page 14

Page: 14 / 90

PC/Mac setup

Installation



Notes on installation

•

Turn the unit off and disconnect the USB cable connected to the unit and the PC/Mac
before installation.

•

Close all applications running on the PC/Mac before installation.

•

You will need admin rights to install the audio driver software to your PC/Mac.

•

Read the License Agreement terms carefully before installation.

•

If you quit the installation halfway through, perform the installation procedure from the
beginning again.

Downloading the audio driver software

Download the dedicated audio driver software to your PC/Mac from the URL below.

pioneerdj.com/support/

Installing the audio driver software

1 Double-click the downloaded installation file.

2 Read the License Agreement terms carefully.

If you agree to the terms, mark the [Agree] check box and
click [OK].

•

If you do not agree to the License Agreement terms, click [

Disagree

] (for Mac)/

[

Cancel

] (for Windows

) to cancel the installation.

3 Follow the on-screen instructions to complete the installation.

Summary of Contents for DJM-V10-LF



























































































Search results

Summary of Contents for DJM-V10-LF

Reviews:

Related manuals for DJM-V10-LF

Brands by name

Popular brands

PIONEER DJ DJM-V10-LF, Manual

Search results

Summary of Contents for DJM-V10-LF

Reviews:

Related manuals for DJM-V10-LF

Brands by name

Popular brands