85
Additional information
•
Set [
ATT.
] to a setting between [
–3dB
] and [
–12dB
] in [
MASTER OUT
] in the [
UTILITY
]
settings.
For the channel input sound:
•
Adjust the [
TRIM
] knob so the channel level indicator lights up with the peak level at around
[
0
] dB.
Effects
BEAT FX does not work.
•
Make sure the [
BEAT FX ASSIGN
] button is lit for the channel you want to add the effect
to.
•
Make sure the [
FX FREQUENCY (HI, MID, LOW)
] button is lit for the band you want to add
the effect to.
SEND does not work.
•
Make sure the [
SEND
] knob is set properly.
•
Make sure any external FX unit connected to the [
EXT1 SEND
] and [
EXT1 RETURN
]
terminals, or the [
EXT2 SEND
] and [
EXT2 RETURN
] terminals, is plugged in properly.
The SEND effect sound is not input to the master sound.
•
Press the [
MASTER MIX
] button to turn on MASTER MIX.
•
Make sure the [
MASTER MIX LEVEL
] knob in the [
SEND
] section is set properly.
The SEND effect sound is not input to the channels.
•
Set the input selector switch for the channel to [
BUILT-IN
], [
EXT1
], [
EXT2
], or [
BUILT-IN
,
EXT1
,
EXT2
].
An external FX unit connected to MULTI I/O does not work.
•
Select a channel to add the effect to with the [
CH SELECT
] switch.
•
Press the [
ON/OFF
] button in the [
MULTI I/O
] section to turn on MULTI I/O.
•
Make sure an external FX unit is properly connected to the [
MULTI I/O SEND
] and [
MULTI
I/O RETURN
] terminals.
•
Make sure mobile devices are properly connected to the mobile device connection terminal
(USB terminal). Launch the FX application on the mobile device.
•
Make sure the [
MODE
] selector button is set properly.
