PIONEER DJ DJM-V10-LF Manual Download Page 13

Page: 13 / 90

PC/Mac setup

Audio driver software

To input or output your PC/Mac’s audio to/from the unit, install the dedicated audio driver
software on your computer.
Setting Utility will also be installed with the audio driver software.

•

For the latest system requirements, compatibility, and supported operating systems, visit
the URL below.
pioneerdj.com/support/

•

Operation is not guaranteed on all PC/Mac models, even if the system requirements are
met.

•

Operation is not guaranteed when multiple units are connected to a PC/Mac.

•

If a PC/Mac without the audio driver software installed is connected to the unit, errors may
occur on the PC/Mac.

•

Malfunctions may occur due to incompatibility with other software installed on a PC/Mac.

Summary of Contents for DJM-V10-LF



























































































Search results

Summary of Contents for DJM-V10-LF

Reviews:

Related manuals for DJM-V10-LF

Brands by name

Popular brands

PIONEER DJ DJM-V10-LF, Manual

Search results

Summary of Contents for DJM-V10-LF

Reviews:

Related manuals for DJM-V10-LF

Brands by name

Popular brands