PIONEER DJ DDJ-FLX6 Instruction Manual Download Page 63

Page: 63 / 122

rekordbox

Changing the Merge FX settings

1 Click

in the

[MFX]

panel in rekordbox.

The

[MERGE FX Settings]

screen is displayed, and you can change the

settings.

•

Change the settings below.
–

[PRESET]

: Changes the preset for Merge FX.

–

[BUILD FX]

: Changes the type of effect applied to the track when Merge

FX is turned on.

–

[BUILD SAMPLE]

: Changes the sample sound/oscillator sound triggered

when Merge FX is turned on.

–

[RELEASE FX]

: Changes the Release FX applied when Merge FX is

turned off.

–

[DROP SAMPLE]

: Changes the sample sound triggered after the Release

FX applied when Merge FX is turned off.

•

You need to select the sample sound when you make the following settings.
Click the

[?]

icon to select the sample sound.

(You need to load the sample sound into the sampler slot before you do this.)
–

[BUILD SAMPLE]

[REPEAT SAMPLE]

–

[BUILD SAMPLE]

[REPEAT UP SAMPLE]

–

[DROP SAMPLE]

[SAMPLER]

Summary of Contents for DDJ-FLX6



























































































































Search results

Summary of Contents for DDJ-FLX6

Reviews:

Related manuals for DDJ-FLX6

Brands by name

Popular brands

PIONEER DJ DDJ-FLX6, Instruction Manual

Search results

Summary of Contents for DDJ-FLX6

Reviews:

Related manuals for DDJ-FLX6

Brands by name

Popular brands