PIONEER DJ DDJ-FLX6 Instruction Manual Download Page 25

Page: 25 / 122

Part names and functions

Rear panel

1 MASTER output terminals (RCA pin jack type)

Connection for a powered speaker, a power amplifier, etc.

•

Compatible with RCA pin jack-type unbalanced outputs.

2 BOOTH output terminals (RCA pin jack type)

Connection for a powered speaker, a power amplifier, etc.

•

Compatible with RCA pin jack-type unbalanced outputs.

3 MIC ATT. (Attenuator) knob

Adjusts the volume of input sound from the

[MIC]

input terminal.

•

Depending on the microphone, the gain of microphone sound differs. Use
this knob to adjust the volume for your microphone before using it. While
DJing, use the

[MIC LEVEL]

knob on the front panel to adjust the

microphone volume.

4 MIC input terminal (1/4" TRS Jack)

Connection for a microphone.

•

Only a phone plug (1/4") can be used.

5 USB port

Connection for a PC/Mac.

•

Be sure to use the supplied USB cable.

•

A USB hub can’t be used with the unit.

•

If your PC/Mac has only a USB Type-C port, you’ll need to use a USB Type-
C male to USB Type-A female cable.

6 Kensington security slot

Connection for a cable lock for security.

Summary of Contents for DDJ-FLX6



























































































































Search results

Summary of Contents for DDJ-FLX6

Reviews:

Related manuals for DDJ-FLX6

Brands by name

Popular brands

PIONEER DJ DDJ-FLX6, Instruction Manual

Search results

Summary of Contents for DDJ-FLX6

Reviews:

Related manuals for DDJ-FLX6

Brands by name

Popular brands