Changing the settings
107
En
E.g. 2 lights on channel 1, plus 3 lights on channel 2, plus 5 lights on
channel 4 means the total value is 28 (20 + 3 + 5 = 28).
Microphone sound through the Booth output
Change whether or not the microphone sound comes out of the booth
channel.
Press the
[PAD FX]
mode button on the left deck.
• [PAD FX]
mode button is lit: The microphone sound comes out of the
booth channel. (Default)
• [PAD FX]
mode button is not lit: The microphone sound doesn’t
come out of the booth channel.
Demo mode
In normal conditions, if you don’t use any features for a specified
amount of time, the unit will enter Demo mode.
•
When any knob or button on the unit is used during Demo mode,
Demo mode is canceled.
Press one of the Performance Pads 1 through 4 on the left deck.
•
Pad 1 is lit: Demo mode is switched off.
•
Pad 2 is lit: Demo mode starts when you don’t use the unit for 1
minute.
•
Pad 3 is lit: Demo mode starts when you don’t use the unit for 5
minutes.
•
Pad 4 is lit: Demo mode starts when you don’t use the unit for 10
minutes. (Default)
