PIONEER DJ DDJ-FLX6 Instruction Manual Download Page 60

Page: 60 / 122

rekordbox

Using Merge FX

You can use the

[MERGE FX]

knob to apply effects for mixing from the

current track to the next.

1 Press the

[MERGE FX]

select button.

The selected Merge FX type changes in order of Merge FX1, 2, 3, 4 each time
you press the button.
If you press the

[MERGE FX]

select button while holding the

[SHIFT]

button,

the effect type changes in the reverse order.

•

You can also change the Merge FX type from the menu in the

[MFX]

panel

in rekordbox.

2 Press the

[MERGE FX]

knob.

Merge FX turns on.
The effect is applied to the track that’s currently playing.
At the same time, sample sound or oscillator sound starts playing.

•

Depending on the selected Merge FX type, the effect is applied as you turn
the

[MERGE FX]

knob.

Summary of Contents for DDJ-FLX6



























































































































Search results

Summary of Contents for DDJ-FLX6

Reviews:

Related manuals for DDJ-FLX6

Brands by name

Popular brands

PIONEER DJ DDJ-FLX6, Instruction Manual

Search results

Summary of Contents for DDJ-FLX6

Reviews:

Related manuals for DDJ-FLX6

Brands by name

Popular brands