PIONEER DJ DDJ-FLX6 Instruction Manual Download Page 61

Page: 61 / 122

rekordbox

•

You can also turn Merge FX on by clicking the MERGE FX On/Off button in
the

[MFX]

panel in rekordbox.

3 Turn the

[MERGE FX]

knob.

The effect is applied to the track that’s currently playing.
The effect sound and the sample sound/oscillator sound change.

•

You can also change the effect sound and the sample sound/oscillator sound
by turning the Merge FX parameter knob in the

[MFX]

panel in rekordbox.

4 Press the

[MERGE FX]

knob again.

Merge FX turns off.
Release FX is applied to the track, the effect sound, and the sample sound/
oscillator sound, then the second sample sound plays after a set amount of
time.

•

[Preferences]

[Controller]

[Effect]

tab >

[MERGE FX]

[Stop

playing the operating deck after MERGE FX finishes]

is set, playback

stops.

•

You can also turn Merge FX off by clicking the MERGE FX On/Off button in
the

[MFX]

panel in rekordbox.

•

The Merge FX parameter knob on the

[MFX]

panel in rekordbox

automatically moves to the center position when you turn off Merge FX.

•

Depending on various settings, the action of the effect may differ.

•

To turn Merge FX off, press the

[MERGE FX]

knob while holding the

[SHIFT]

button. You can also turn Merge FX off by clicking the MERGE FX On/Off
button in the

[MFX]

panel in rekordbox while holding the

[SHIFT]

button.

Summary of Contents for DDJ-FLX6



























































































































Search results

Summary of Contents for DDJ-FLX6

Reviews:

Related manuals for DDJ-FLX6

Brands by name

Popular brands

PIONEER DJ DDJ-FLX6, Instruction Manual

Search results

Summary of Contents for DDJ-FLX6

Reviews:

Related manuals for DDJ-FLX6

Brands by name

Popular brands