85
Additional information
You cannot save settings.
•
Wait for at least 10 seconds to turn the unit off after changing settings. Changed settings
may not be saved if you turn the unit off immediately after you make the changes.
The unit does not recognize a connected USB device.
•
Check the USB device is connected properly.
•
You cannot use a USB hub. Connect the USB device directly to the unit.
•
Check that the USB device is supported by the unit.
•
Check that the file format is supported by the unit.
•
Turn the unit off and on.
You cannot save cue points/loops on a storage device (SD,
USB).
•
If the storage device (SD, USB) is write-protected, release the lock.
•
If there is not enough free space on the storage device (SD, USB) , free up some space.
•
Up to 10 cue points/loop points can be saved per track on a storage device (SD, USB). If
10 points are already saved for the track, delete some points.
Cue points/loop points saved for a track on a storage device
(SD, USB) are not displayed.
•
Cue points/loop points may not be displayed if you did not properly disconnect the USB
device from the unit the last time you used it, or if you turned the unit off while the SD card
memory indicator or USB device indicator was blinking.
The operation does not start immediately after you press the
button for playing a Hot Cue or starting re-loop, or when you
flip the lever for reverse playback.
•
If Quantize is turned on, turn it off. When Quantize is turned on, a slight delay occurs as it
synchronizes with the closest beat position.
The playing address does not show the remaining time.
•
It may take some time to display the playing address when playing a file saved in VBR
format.
