71
CDJ-3000
5
6
7
8
5
6
7
8
A
B
C
D
E
F
8.3 WRITING THE SERIAL NUMBER OF THE UNIT
SY
Writing the serial number can be performed from a PC that is connected with this unit via a USB B cable.
Preparations
1
Download the software for writing the serial number from Niis.
2
The compressed files decompress and save to PC.
The generated folder is below.
!
Ini folder
!
Log folder
!
CDJ3000.SNW.exe
!
hidcom.dll
Procedure
1
Turn on PC, and click “CDJ3000.SNW.exe” in the generated
folder. When the software is started, untick “Label print”.
2
Connect the unit with a PC via a USB B cable.
3
While holding the
TEMPO ±6/±10/±16/WIDE
and
CUE/LOOP CALL
c
buttons pressed, press the
u
button to
turn the unit on.
(Start up the unit in Service mode.)
4
Push [Serial Number Write] button, display serial input dialog
(first time).
Enter serial number by handwork or barcode reader, and push
“Enter”.
If enter by handwork, enter “ ' ” before serial number.
(If forgot, displayed error)
If enter by barcode reader, need to connect for PC in advance.
*Reference screen
5
Again display serial input dialog (second time), enter serial
number by handwork or barcode reader, and push “Enter”
like Step
4
.
6
Dialog is displayed for the input of Destination Code, you need
to enter in accordance with following table.
7
If update is finished correctly, display “OK” after a while.
This is completed about to write serial number for system.
You need to confirm by Service mode about to write correctly.
The unit is already starting in Service mode [Mode 1/10] VERSION
INFORMATION. Confirm that "DESTINATION" is "SY" (ex: LSYXJ
model) and "SERIAL No" is the same as the serial number of the
unit.
Model Name
Input Destination Code
CDJ-3000/LSYXJ
CDJ-3000/L
CDJ-3000/AXJ
CDJ-3000/A
CDJ-3000/UXJCB
CDJ-3000/U
DESTINATION
SY
A
CU
CDJ-3000-W/AXJ
CDJ-3000-W/A
CDJ-3000-W/UXJCB
CDJ-3000-W/U
CDJ-3000-W/PXJ
CDJ-3000-W/L
A
CU
SY
