70
CDJ-3000
1
2
3
4
A
B
C
D
E
F
1
2
3
4
8.2 UPDATING OF THE FIRMWARE
g
Downloading and Unzipping the Updater File
g
How to Update
1
Enter Update mode.
While holding the LOOP IN/CUE (IN ADJUST) and LOOP RELOOP/EXIT buttons pressed, press the
u
button
(to set it to ON).
When "Connect USB storage device into top USB port." is displayed, release the button.
2
Plug a USB memory device to use for updating into the USB slot.
3
Updating starts.
At the same time, the current version and the updated version are displayed.
+
NEVER unplug the USB memory device nor turn the unit OFF during updating.
4
When "Firmware update is complete. Turn the power off/on before using." is displayed, set the power to off.
After confirming that the firmware has been updated, remove the update USB memory.
Updating is completed.
If updating does not start or "MAIN update file is corrupt." is displayed, the file may be corrupted.
Restart from downloading of an updater.
If updating cannot be started even after the above retry, the USB memory device may be faulty. Retry updating, using
another USB memory device.
1
Download the zipped firmware file for the latest firmware.
2
Unzip the CDJ3K_v***.zip file to get the updater file.
CDJ3K_v***.UPD
+
The above xxx denotes the version of new firmware.
+
The extension (.upd) may not be displayed, depending on the setting of the computer.
g
Preparation for Updating
Save the firmware file [CDJ3K_v***.UPD] to the root directory of USB memory.
+
DO NOT rename the file name.
+
DO NOT save the multiple firmware files in the USB memory.
+
Please use USB memory formatted by FAT/FAT32. It does not correspond to HFS+.
u
button
USB slot
LOOP IN/CUE (IN ADJUST) button
LOOP RELOOP/EXIT button
