PIONEER DJ AlphaTheta CDJ-3000-W Service Manual Download Page 39

Page: 39 / 89

CDJ-3000

Touch display

Jog display

[Detail of this mode]

You can check the state of all LEDs in the single and in the full-color, and also check color patterns on the Touch display.

All LEDs shown in the following image light on when you enter this page, and then the page title is hidden and

the white screen is displayed on the Touch display and Jog display.

The initial state of full-color LED is white indication.

Press [TRACK FILTER/EDIT] or [SHORTCUT] button to switch the color of full-color LED and the color pattern on

the Touch display.
However, the Jog display always displays the white screen.

You can check the JOG LED Red indication only when the color pattern displays the red screen on the Jog display.

[LED lighting location]

[Color pattern]

[TRACK FILTER/EDIT]

button

[SHORTCUT]

button

: Full-color LED (These color change according to the color pattern)
: Monochromatic LED

[Mode 2/10] LED ALL ON, LCD CHECK

Summary of Contents for AlphaTheta CDJ-3000-W


























































































Search results

Summary of Contents for AlphaTheta CDJ-3000-W

Reviews:

Related manuals for AlphaTheta CDJ-3000-W

Brands by name

Popular brands

PIONEER DJ AlphaTheta CDJ-3000-W, Service Manual

Search results

Summary of Contents for AlphaTheta CDJ-3000-W

Reviews:

Related manuals for AlphaTheta CDJ-3000-W

Brands by name

Popular brands