5
To avoid damages to the instrument or probe, please do not leave
them in fog, liquid, or solvent.
Disconnect the instrument from all power sources, and then clean
it with a soft wet cloth.
Clean the loose dust on the outside of the instrument and probe
with a soft cloth. When cleaning the LCD, take care to avoid
scarifying it.
To avoid damages to the surface of the instrument and probe,
please do not use any corrosive liquid or chemical cleanser.
Make sure that the instrument is completely dry before restarting it
to avoid short circuits or personal injuries.
Safety Terms and Symbols
(1)Terms on the product.
These terms may appear on the product:
DANGER
:
Indicates direct injuries or hazards that may happen.
WARNING
:
Indicates potential injuries or hazards that may
happen.
CAUTION
:
Indicates potential damages to the instrument or other
property that may happen
(2)Symbols on the product.
These symbols may appear on the
product:
Hazardous Voltage
Protective Earth Ground
Warning
Earth Ground
Power Switch