22
Specifications
All specification applies to 10X probe and All the DS-1010P Digital
Storage Oscilloscopes.
To verify that the oscilloscope meets specifications, the oscilloscope
must first meets the following conditions:
The oscilloscope must have been operating continuously for thirty
minutes within the specified operating temperature.
You must perform the Do Self Cal operation, accessible through the
Utility menu, if the operating temperature changes by more than 5
°
C.
The oscilloscope must be within the factory calibration interval.
All specifications are guaranteed unless noted “typical.”
Inputs
Input Coupling
AC,DC,GND
Input Impedance
1M
Ω
±2% || 16Pf±3Pf,50
Ω
+/-2%
Ch to Ch Isolation
(Both channels in same
V/div setting)
>100:1 at 50MHz
Maximum input Voltage
400V
（
DC+AC PK-PK
，
1M
Ω
input
impedance
，
X10
），
CAT I
Probe Attenuator
1X,10X
Probe Attenuator Factors
Set
1X,5X,10X,50X,100X,500X,1000X
